Differences

This shows you the differences between two versions of the page.

--- project:brmdoor:start [2023/01/14 19:37] – [PIN assignments] fix pinout/link for rpi 2B pinout abyssal
+++ project:brmdoor:start [2023/09/17 20:35] (current) – [Raspberry support] pysftp dropped and changed to paramiko for SFTP abyssal
@@ Line 51: / Line 51: @@
   * Raspberry 4B
-Tested Raspbian 9 and 10 (Raspi OS 2021-03-04).
+Tested Raspbian 9 and 10 (Raspi OS 2021-03-04). Still works on 2023-09-17, when we needed to drop ''pysftp'' and use ''paramiko'' directly, allows to use ECDSA and Ed25519 keys.
+Raspberry 1 and 2 - it's just slow, everything is slow there. Raspberry 3B+ or 4 with USB boot and USB flash instead of SDcard recommended.
 Make sure you enable SPI in device tree or ''dtparam=spi=on'' in ''/boot/config.txt'' depending on Raspi model otherwise reader won't work. Raspi 3B+ boots from USB out of the box, 4B needs enabling it manually. Latest Raspbian does not enable ssh after install put empty file named ''ssh'' in ''/boot'' directory to enable.
@@ Line 306: / Line 308: @@
 {{:project:brmdoor:s_pxl_20230114_183754736.jpg?600|}}
+==== Outside view of PN532 shield (14 Jan 2022) ====
+{{:project:brmdoor:s_pxl_20230114_195316653.jpg?600|}}
+{{:project:brmdoor:s_pxl_20230114_195345155.jpg?600|}}
 ===== Brmdoor HOWTO (displayed after you login as root, in /etc/motd) =====
 <code>
@@ Line 373: / Line 381: @@
 Add following to your ~/.ssh/config, edit your key if necessary (the key needs to be added on brmbar and on brmdoor):
+You need to have access to ''data.brmlab.cz'' and ''brmdoor'' as well.
+You need ssh that supports ''ProxyJump'' (should not be a problem unless you have reeeeeaaaaaly old system).
 <code>
-Host = brmbar-external
-VerifyHostKeyDNS = no
+Host data.brmlab.cz
-Hostname = hrach.eu
+User root
-Port = 22715
+Port 22
-User = brmlab
+IdentityFile = ~/.ssh/whatever_your_key_is
-IdentityFile = ~/.ssh/id_rsa
-ForwardX11 = no
-UsePrivilegedPort = no
 Protocol 2
-Host = brmdoor-external
+Host = brmdoor-via-data
-ProxyCommand = ssh brmbar-external nc -q1 %h 22
+ProxyJump = data.brmlab.cz
-Hostname = 192.168.77.247
+Hostname = 192.168.77.30
-Port = 22715
+Port = 22
 User = root
-IdentityFile = ~/.ssh/id_rsa
+IdentityFile = ~/.ssh/whatever_your_key_is
 ForwardX11 = no
 UsePrivilegedPort = no
 Protocol 2
+</code>
+Then using
+<code>
+ssh brmdoor-via-data
 </code>
-Then ssh brmdoor-external will get you brmdoor shell.
+will get proxyjump over data into brmdoor.