Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
project:reprap:firstime [2016/07/07 16:39]
yan added drevoconfig
project:reprap:firstime [2016/07/07 16:40] (current)
yan
Line 1: Line 1:
 ===== How to start 3D printing in Brmlab ===== ===== How to start 3D printing in Brmlab =====
  
-=== brmlab-independent preparation (creating GCODE) ===+==== brmlab-independent preparation (creating GCODE) ​====
   * download and install [[http://​www.slic3r.org|slic3r]]   * download and install [[http://​www.slic3r.org|slic3r]]
   * download [[http://​web.natur.cuni.cz/​~ax/​slic3r-brmlab/​Slic3r_config_bundle.ini|config files]] (thx2 Ax) and **optimized configs for drevena printer [[https://​github.com/​brmlab/​reprap/​blob/​master/​slic3r_configs/​drevo.ini | here]]** - names are: filament - **ABS_drevo**,​ slicing - **drivi**   * download [[http://​web.natur.cuni.cz/​~ax/​slic3r-brmlab/​Slic3r_config_bundle.ini|config files]] (thx2 Ax) and **optimized configs for drevena printer [[https://​github.com/​brmlab/​reprap/​blob/​master/​slic3r_configs/​drevo.ini | here]]** - names are: filament - **ABS_drevo**,​ slicing - **drivi**
Line 10: Line 10:
  if everything looks like it is working than you're ready for getting to next stage  if everything looks like it is working than you're ready for getting to next stage
  
-=== brmlab-dependend preparation ===+==== brmlab-dependend preparation ​====
   * check if you can connect to printer ([[http://​drevena.brm | drevena]] or [[http://​zluta.brm | zluta]]) , what you probably see (if you sucess) is Octoprint UI, which is running on RPI to which printer is connected.   * check if you can connect to printer ([[http://​drevena.brm | drevena]] or [[http://​zluta.brm | zluta]]) , what you probably see (if you sucess) is Octoprint UI, which is running on RPI to which printer is connected.
   * in this step just ask somebody who is already involved in 3d-printing,​ he'll help you easily from this point. If you don't have account please contact [[user:​ray]] or [[user:​yan]].   * in this step just ask somebody who is already involved in 3d-printing,​ he'll help you easily from this point. If you don't have account please contact [[user:​ray]] or [[user:​yan]].
   * after you sucesfully and comfortably print with supervising (probably only few prints) you can ask for permission to print alone. Permission will be granted after you will show knowledge crucial for safety and correct printing (you only need to show that you can understand and print by [[project:​reprap:​Anytime|3d printing cookbook]] , nothing more). We hope that this procedure will lead to state when you'll find printers in operational state more often than nowadays.   * after you sucesfully and comfortably print with supervising (probably only few prints) you can ask for permission to print alone. Permission will be granted after you will show knowledge crucial for safety and correct printing (you only need to show that you can understand and print by [[project:​reprap:​Anytime|3d printing cookbook]] , nothing more). We hope that this procedure will lead to state when you'll find printers in operational state more often than nowadays.
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki