Differences

This shows you the differences between two versions of the page.

--- project:brmdoor:start [2018/06/07 21:08] – [OPEN/CLOSED switch with update of topic on IRC] ruza
+++ project:brmdoor:start [2018/10/06 19:58] – [Remote access from outside brmlab] abyssal
@@ Line 41: / Line 41: @@
 ===== BrmDoor Firmware =====
-Source repository: https://github.com/brmlab/brmdoor
+Source repository: https://github.com/hiviah/brmdoor_libnfc
 ===== List of authorized cards =====
@@ Line 82: / Line 82: @@
 </code>
-===== OPEN/CLOSED switch with update of topic on IRC =====
+===== OPEN/CLOSED switch with update of topic on IRC and SpaceAPI format on VPS =====
 In ''brmdoor_nfc.config'', look at the section ''[open_switch]''. IRC must be enabled in ''[irc]'' section for status
@@ Line 122: / Line 122: @@
 until the physical switch changes the value.
+==== Reporting/uploading status in SpaceAPI format ====
+Currently since v 0.2 brmdoor can upload the status and information in [[http://spaceapi.net/ | SpaceAPI.net format]].
+The status JSON is mapped currently is mapped to [[https://brmlab.cz/spaceapi/status.json]]. The interesting non-static part
+of json is in under "state" key - "open" (boolean) and "lastchange" (Unix timestamp).
+Currently to be compatible with old URL (https://status.brmlab.cz/brmd/brmstatus.json)
+for the spaceAPI.net since we can't change it and can't submit new, there is alias
+in ''/etc/apache2/sites-available/status.brmlab.cz.conf'' to directory ''/home/brmdoor-web/spaceapi-status'' where status file is
+uploaded by brmdoor (it's over SFTP with internal-sftp chroot, ssh-key login, so that in case of compromise of brmdoor there
+is not much the attacker could do with it (and password can't be bruteforced).
 ===== PIN assignments =====
@@ Line 222: / Line 234: @@
   * Setting topic is not finished (python-irc has fairly bad API to retrieve topic)
+===== Remote access from outside brmlab =====
+Add following to your ~/.ssh/config, edit your key if necessary (the key needs to be added on brmbar and on brmdoor):
+<code>
+Host = brmbar-external
+VerifyHostKeyDNS = no
+Hostname = hrach.eu
+Port = 22715
+User = brmlab
+IdentityFile = ~/.ssh/id_rsa
+ForwardX11 = no
+UsePrivilegedPort = no
+Protocol 2
+Host = brmdoor-external
+ProxyCommand = ssh brmbar-external nc -q1 %h 22
+Hostname = 192.168.77.247
+Port = 22715
+User = root
+IdentityFile = ~/.ssh/id_rsa
+ForwardX11 = no
+UsePrivilegedPort = no
+Protocol 2
+</code>
+Then ssh brmdoor-external will get you brmdoor shell.