|1930 - meetup 2000 Valná hromada|
|2200 Elektřina jinak @ Styx smart club = skoro přes řeku od brmlabu|
|2000 Digital Signal Processing: Reloaded|
This is an old revision of the document!
Our current location is Bubenska 1. Large building near the subway station Vltavska, just on the other side of the highway. You should use the entrance from the highway side! (Big ORCO logos everywhere.) At the gate, say you are going to Brmlab, and follow the arrows.
In case of trouble, try calling +420 608 801 582 (stationary phone in brmlab).
You can get to Bubenska 1 by subway (Vltavska, line C) or tram (Vltavska or Strossmayerovo namesti). See map and street view below for more info.
Our space is open whenever some member is inside. In general, you'll have hard luck finding anyone there during the day, but most of the evenings, it is occupied. If you want to visit us, the best time is Tuesday evening or whenever some event is scheduled. Curious about what you can see in brmlab?
The building was built in the thirties of the twentieth century by Elektricke podniky Hl. m. Prahy (former Prague's city traffic company). Now there is culture center of the seventh Prague's district located in there - KC Vltavska.
Jsi-li člen, dostaneš se dovnitř RFID kartou. Nejsi-li člen, musíš počkat, až uvnitř někdo bude. 100% šanci máš v úterý večer, jiné večery cca 75% (o prázdninách méně), dopoledne leda když ještě někdo nestihl jít spát…
metro/tube/underground/subway to station Vltavská at line C (red one)
It is theoretically possible to park directly in front of brmlab too, but only if you are carrying something big in/out of brmlab - always arrange that with us in advance. You need to enter through the south gate: when going by the Bubenska street to the south, turn right immediately after passing the Orco building, then turn right immediately again to a small side road. Use intercom and wait a minute, the gate must be opened manually by a janitor.
Some photos to show you how the interior looks like …
More photos are available here.